How to Convert Audio to MP3 Without Losing Quality
Updated October 2026
An MP3 is lossy, so some detail is always removed. You can keep the loss small by converting once, from a lossless master, at a high bit rate.
The short version
- Convert from the WAV or FLAC master, never from another MP3.
- Use a high bit rate, the highest your platform accepts.
- Check the true peak of the MP3, because conversion can raise it.
- Listen to the MP3 on the device you will use.
Start from the master
Keep the original WAV or FLAC. Each conversion from an MP3 adds loss, so a second MP3 from the first one is worse than a single conversion from the master.
Set the bit rate
Choose the highest bit rate the platform accepts. For speech, a high bit rate is very close to the original for most listeners. Check the platform’s recommendation before you export.
Check the peak
Conversion can raise the peaks. After exporting, check the true peak of the MP3, and lower the level if it is above -1 dBTP. The true peak explanation covers why.
Listen on your device
Play the MP3 on the phone or speaker your listeners will use. If something sounds wrong, export again at a higher bit rate from the master.
Export the MP3 from the master
Tunedzy exports MP3 from its master at the bit rate you choose, with the true peak checked.
Free tools for this
Frequently asked questions
Does one conversion lose quality?
A little, at a high bit rate it is hard to hear for speech.
Can I convert an MP3 to a better MP3?
No. That adds loss. Go back to the master.
What bit rate should I use?
The highest the platform accepts, checked on your device.
Keep going
All guides and comparisons · Tunedzy Go on your phone · Pricing